RAM 1500 Lift Kit with Bilstein Shocks

This kit includes Bilstein B60 Front Shocks, Bilstein B5160 Remote Reservoir Rear Shocks, Bilstein Front Coils, Kings Raised Rear Coil Springs and Tough Dog Upper Control Arm Kit.

For the absolute ultimate in heavy duty offroad capabilities, nothing surpasses the Bilstein B60.

The monotube construction offers exceptional heat dissipation via huge oil volume, which in turn means enhanced overall durability and a consistent level of damping performance. The Bilstein B60 shock absorber the ultimate choice for heavy duty touring and offroad use.

Multiple snap-ring grooves in the body allow for different spring seat positions offering more flexibility to adjust the front ride height with the supplied Bilstein Front Coil Springs.

The Bilstein B8 5160 is a B8 with an added remote reservoir, the BILSTEIN B8 5160 provides ultimate vehicle control on even the harshest terrain. Zinc plating and increased oil capacity dissipate more heat assuring long term durability. Thanks to the Remote reservoir technology expanding the limits of your suspension system. Rather than housing the gas chamber in the shock body, the gas chamber instead is located in the reservoir. As a result, oil capacity is also expanded, creating greater heat dissipation, eliminating reduced performance due to overheating and improving long-term durability.

Tough Dog UCAs are designed to return a vehicles suspension and steering geometry to standard after fitting a lift kit. Tough Dogs UCAs are fixed length and position arms, which guards against the alignment being knocked out of specification by a solid offroad hit. On top of the alignment issues, clearance problems between the strut and the upper control arm on down travel can also occur. The slim line tubular design of Tough Dog UCAs create the maximum possible clearance.

King Springs are manufactured here in Australia using X5K Steel, this new generation High Strength Spring Steel can with-stand higher operating stresses and has superior resistance to sag, improved toughness and improved corrosion fatigue properties. Fitting an aftermarket raised spring is ideal for vehicles fitted with accessories, heavily laden vehicles, improved load carrying abilities and increased ground clearance. All King Springs heavy duty replacement springs are designed to be uprated. The degree of uprating varies between vehicles, but can generally be stated at 20-40%.

This complete suspension lift kit comprises of the following products:

1 Pair Bilstein B60 Front Struts

1 Pair Bilstein Front Springs

1 Pair Bilstein B5160 Remote Reservoir Rear Shocks

1 Pair Raised Rear King Springs

1 Swaybar Relocation Kit

1 Pair Tough Dog Upper Control Arms

Approximate Front Lift Height: 0-2.5 Inch

Approximate Rear Lift Height: 1.5 Inch

Select from the Front Accessories & Rear Load options to select the most appropriate spring rate for your vehicles setup.

Constant Load refers to fixed accessories that will remain on the vehicle at all times such as a steel tray, canopy, rear draws, rear bar with spare wheel carrier and alike. Constant Load springs are designed to be used with the minimum constant load rating on the vehicle at all times.

Product Notes:

Degree of raised height may vary depending on life and/or age of the vehicle, accessories fitted, material used for accessories and some factory options.

Click Here for Warranty Information

Please note images are only a representation of the parts and may not necessarily be the image of the part number you are viewing.