50mm Lift Kit With Koni Heavy Track Shocks

Description

This kit includes Koni 82 Series Heavy Track Shocks, Upgraded Front Torsion Bars, Raised Rear Leaf Springs and required fitting components.

Koni 82 Series Heavy Track shock absorbers are a twin-tube unit with the ability to adjust the rebound forces to combat general wear and tear of the unit over time to ensure you are getting the maximum life span and value from your shocks. Adjustments can also be made to fine tune the damper to perform as required allowing more control over the ride quality.

Tough Dog heavy duty replacement Torsion Bars are ideal to increase spring rate after fitting front accessories or to raise the front ride height for improved off-road performance and clearance over uneven terrain. Designed at approximately 30% higher spring rate over the OEM bars these performance-proven, easy to install bars are especially beneficial when oversize tyres are fitted or to restore lost ride height.

Tough Dog progressive rate leaf springs feature primary and secondary stage leaves to ensure that the vehicles ride remains uncompromised. As the spring is compressed under load, the heavier second stage is engaged to prevent excessive sag. The production process ensures maximum life, corrosion protection and prevention against sag.

Additionally greasable pins, shackles, urethane spring bush kit and U-bolts make this an all-inclusive package.

This complete suspension lift kit comprises of the following products:

1 Pair Koni 82 Series Heavy Track Front Shocks

1 Pair Koni 82 Series Heavy Track Rear Shocks

1 Pair Tough Dog Front Torsion Bars

1 Pair Rear Raised Tough Dog Leaf Springs

1 Tough Dog Rear Spring Bush Kit

1 Pair Tough Dog Greasable Shackles

1 Pair Tough Dog Greasable Pins

4 Tough Dog U-Bolts

Approximate Lift Height: 40mm

Select from the Front Accessories & Rear Load options to select the most appropriate spring rate for your vehicles setup.

Constant Load refers to fixed accessories that will remain on the vehicle at all times such as a steel tray, canopy, rear draws, rear bar with spare wheel carrier and alike. Constant Load springs are designed to be used with the minimum constant load rating on the vehicle at all times.

Product Notes:

Degree of raised height may vary depending on life and/or age of the vehicle, accessories fitted, material used for accessories and some factory options.

Click Here for Warranty Information

Please note images are only a representation of the parts and may not necessarily be the image of the part number you are viewing.